Operation Guest Room Recovery

Remember this padded headboard and these side tables and this guest room reveal? Well, we decided to upgrade the entire guest room using the same materials and spending little to no money. It's great to see how far we have come in 2 years. We have worked on some amazing projects and still have a lot more lined up that just amaze me. I’m so excited and thankful for how how far JT and I have come. We also have amazing friends/mentors who have been instrumental to improving our home decor, woodworking and designing skills. 

First off, here is where we started from. 

Guest Room Before

Not too bad but the side tables were starting to bother me (seeing as we are now such great builders :) ). I really hated our attempt at staining the wood; the construction was a little too shabby. Our first move was to disassemble all 4 side tables and reconstruct them into 2 side tables. We wanted to maintain a modern look with open storage so JT and I came up with a design. The original tables were 2 different sizes so the resulting tables are 2 different sizes. 

new design

We painted them grey and added a silver drawer pull to give the illusion of a drawer. I am pretty sure some guests will pull on the dummy drawer and be shocked .

side table with grey paint

The next project was a quick one, I updated the map shades. I wanted to the lamps to the side table. I followed this tutorial here without the ribbon.

materials used

refinished lamps

And finally the Pièce de résistance….the head board!!!! We got some lovely purple upholstery fabric that was on Mega sale with silver nail head trim to update the headboard.

We wanted some curves to the room so after taking of the backing fabric and taking off come of the foam and batting we measured some points, used a bowl to cut off the curve and then used the first piece to cut out the second piece

cut off 2 corner arcs using a plastic bowl

Next, we roughly cut off about 1/2 and inch off foam around the top and sides for the nail head trim.

The hardest part by far was adding on the nail head trim. That took about 2 hours while everything else took minutes. We started with the top, continued to the right side and finally the left side. 

 

adding the nail-head trim

We used a cover button kit to make 7 buttons. After some measurements we placed 3 buttons on the top row and 4 buttons on the bottom. The bottom half of the headboard is covered by pillows so we didn't see a need to have more than 2 rows. We passed the buttons through the holes using a long embroidery needle and embroidery thread. 

back view of holes for buttons

Buttons on 

Finally, with some team effort and nip-tucking we secured the bottom using the staple gun. I reinforced the entire perimeter at the back then attached the back cover to kepe things neat (felt from the old headboard)

back cover to keep things neat and tidy

These were a really fun projects, it took about a day to get all three projects done.

ready for guests 

I believed Operation Recovery was a success if I do say so myself.